Data Request

The request will be queued and processed in the order they are received. A zipped comma delimited file(s) with descriptive column headers will be created. There will be one file per data type for the requested Project. Notification of the URL will be sent via E-mail to the requestor.

For a detailed explanation of all data types and collection frequencies, please review the Data Descriptions document. Please select data type(s) or All data types for Project: AT-0002.

Aboveground Biomass -- Zero Standard data available. Accretion (Feldspar) -- Standard data available from 10/19/2009 to 1/28/2021 [296] Forested Swamp Vegetation -- Zero Standard data available. Herbaceous Marsh Vegetation -- Standard data available from 10/26/1998 to 8/21/2020 [2,963] Hydrographic Hourly -- Standard data available from 4/2/2002 to 1/14/2021 [127,384] Hydrographic Monthly -- Standard data available from 10/19/2009 to 10/16/2020 [577] Soil Properties -- Standard data available from 4/23/2012 to 3/5/2018 [36] Surface Elevation -- Standard data available from 10/19/2009 to 1/28/2021 [864]

Select All data available from 10/26/1998 to 1/28/2021 [132,120]

Enter date range and return email address.

From Date (mm/dd/yyyy): *

To Date (mm/dd/yyyy): *

E-mail address (required for notification): Requestor Email is Required. Invalid Resquestor Email format is: xxxxxxx@xxxx.xxx

Include Station Latitude and Longitude NOTE: Point locations stored in CIMS utilize the WGS84 geodetic system (EPSG:4326).

    

Disclaimer

Information that fulfills this data request has been carefully prepared from the best available sources of data. It is intended for general informational purposes only and should not be considered authoritative for navigational, engineering, other site-specific uses, or any other uses. The Coastal Protection and Restoration Authority of Louisiana (CPRA) does not warrant or guarantee its accuracy, nor does CPRA assume any responsibility or liability for any reliance thereon.

Elevation measurements are dependent upon the choices of standards that were used, including: vertical datums, geoids, ellipsoids, and various other factors. These factors should be considered when comparing elevation data between stations.

Link to "Data Descriptions" document:  Data Descriptions

Link to "A Contractor's Guide to Minimum Standards" document:   Contractor's Guide